Washer Repair

In-home repair for washing machines that won’t drain, spin, fill or finish a cycle. All major brands. Same-day appointments are often available, depending on our schedule.

Washing Machine Repair at Your Home

Beltway Appliance Repair fixes washing machines at your home across Northern Virginia, Washington, DC and Maryland. Our factory certified technicians track down drain, spin, leak and electrical problems, then explain your repair options clearly so you can make an informed decision. Every repair is backed by our 90-day repair warranty.

We work on front-load and top-load washers from all major brands, including high-efficiency models and stacked washer-dryer units.

Washers We Repair

  • Front-load washers
  • Top-load washers
  • High-efficiency (HE) washers
  • Agitator and impeller models
  • Stacked washer-dryer units
Washer repair: technician servicing a front-load washer in a home laundry room

Common Washing Machine Problems

What these symptoms usually point to. Our technician confirms the actual cause at your home before recommending a repair.

Washer Won’t Drain

Water stays in the drum after the cycle ends, or clothes come out soaking wet.

Common causes:

  • Clogged drain pump filter or hose
  • Failed drain pump
  • Something caught in the pump, like a sock or coin

Washer Won’t Spin

The drum doesn’t spin, or spins too slowly to wring clothes out.

Common causes:

  • Unbalanced or overloaded drum
  • Worn drive belt or motor coupler
  • Faulty lid switch or door lock

Washer Leaking Water

Water on the floor during or after a cycle.

Common causes:

  • Worn fill hoses or loose connections
  • Torn front-load door boot seal
  • Leaking pump or tub seal

Loud Noises or Shaking

Banging, grinding or the washer walking across the floor.

Common causes:

  • Worn drum bearings
  • Broken suspension springs or dampers
  • Washer not level

Won’t Start or Fill

Nothing happens, the washer hums, or it won’t take in water.

Common causes:

  • Door lock or lid switch failure
  • Water inlet valve or supply problem
  • Control board or timer fault

Odors or Error Codes

A musty smell, or an error code you can’t clear.

Common causes:

  • Residue buildup in the door seal or drain
  • Clogged drain filter
  • Sensor or control problem behind the code

Quick Checks Before You Call

A few things are safe to check yourself before you call:

  • Make sure the washer is plugged in and the breaker hasn’t tripped.
  • Check that both water supply valves behind the washer are fully open.
  • Look for kinks in the fill hoses and the drain hose.
  • Make sure the door or lid closes and latches firmly.
  • Redistribute a heavy or lopsided load and try a drain and spin cycle.

Still not working? Call or text (703) 495-3095 or request service online.

Protect Your Home From Washer Leaks

  • Inspect the fill hoses for bulges, cracks or rust at the fittings a few times a year.
  • Washer makers such as Whirlpool recommend replacing inlet hoses about every 5 years.
  • Know where your washer’s water shut-off valves are, and turn them off if you’ll be away for an extended time.
  • Leave a front-load washer’s door open after use so the seal can dry.

Is It Worth Repairing Your Washer?

Many washer problems come down to parts like drain pumps, door locks, lid switches, belts, water valves and door seals. These repairs are often worth doing on a washer that’s otherwise in good condition.

Bigger repairs, such as drum bearings, a transmission or a main control board, cost more. On an older washer, replacement may make more sense. A common rule of thumb: consider replacing when the washer is near the end of its expected life and the repair would cost more than half the price of a comparable new one.

Our technician diagnoses the problem first and explains your options, so the decision is yours.

Washer Brands We Repair

  • GE
  • Whirlpool
  • Samsung
  • LG
  • Frigidaire
  • Maytag
  • KitchenAid
  • Bosch
  • Electrolux
  • JennAir
  • Amana
  • Café

Don’t see your brand? Call or text (703) 495-3095 with the brand and model number.

See all brands we service →

Washer Repair FAQs

Have another question? We’re open Monday – Saturday, 7 AM – 10 PM.

Call or text (703) 495-3095

Most drain problems are caused by a clogged drain pump filter, a kinked or blocked drain hose, a failed drain pump, or a small item like a sock caught in the pump. If cleaning the filter doesn’t help, the pump or a control problem is the likely cause.

A washer may not spin if the load is unbalanced or too large, the lid switch or door lock has failed, the drive belt or motor coupler is worn, or the motor or control isn’t working. Redistributing the load is a good first check.

Leaks most often come from worn fill hoses or loose connections, a torn door boot seal on a front-load washer, or a leaking pump or tub seal. Where the water appears during the cycle helps pinpoint the source.

Heavy shaking usually means an unbalanced load, a washer that isn’t level, worn suspension springs or dampers, or worn drum bearings. A loud rumbling or grinding sound that gets worse over time often points to bearings.

Often, yes. Repairs to parts like drain pumps, door locks, belts and water valves are usually worth it on a washer in good condition. Major repairs such as drum bearings or a transmission may not make sense on an older machine. Our technician explains your options after diagnosing the problem.

Yes. We repair front-load and top-load washers, including high-efficiency models and stacked washer-dryer units, from all major brands.

Same-day appointments are often available, depending on our schedule. We’re open Monday through Saturday from 7 AM to 10 PM and serve Northern Virginia, Washington, DC and Maryland. Call or text (703) 495-3095 early in the day for the best chance at a same-day visit.