Washer Repair
In-home repair for washing machines that won’t drain, spin, fill or finish a cycle. All major brands. Same-day appointments are often available, depending on our schedule.
Washing Machine Repair at Your Home
Beltway Appliance Repair fixes washing machines at your home across Northern Virginia, Washington, DC and Maryland. Our factory certified technicians track down drain, spin, leak and electrical problems, then explain your repair options clearly so you can make an informed decision. Every repair is backed by our 90-day repair warranty.
We work on front-load and top-load washers from all major brands, including high-efficiency models and stacked washer-dryer units.
Washers We Repair
- Front-load washers
- Top-load washers
- High-efficiency (HE) washers
- Agitator and impeller models
- Stacked washer-dryer units

Common Washing Machine Problems
What these symptoms usually point to. Our technician confirms the actual cause at your home before recommending a repair.
Washer Won’t Drain
Water stays in the drum after the cycle ends, or clothes come out soaking wet.
Common causes:
- Clogged drain pump filter or hose
- Failed drain pump
- Something caught in the pump, like a sock or coin
Washer Won’t Spin
The drum doesn’t spin, or spins too slowly to wring clothes out.
Common causes:
- Unbalanced or overloaded drum
- Worn drive belt or motor coupler
- Faulty lid switch or door lock
Washer Leaking Water
Water on the floor during or after a cycle.
Common causes:
- Worn fill hoses or loose connections
- Torn front-load door boot seal
- Leaking pump or tub seal
Loud Noises or Shaking
Banging, grinding or the washer walking across the floor.
Common causes:
- Worn drum bearings
- Broken suspension springs or dampers
- Washer not level
Won’t Start or Fill
Nothing happens, the washer hums, or it won’t take in water.
Common causes:
- Door lock or lid switch failure
- Water inlet valve or supply problem
- Control board or timer fault
Odors or Error Codes
A musty smell, or an error code you can’t clear.
Common causes:
- Residue buildup in the door seal or drain
- Clogged drain filter
- Sensor or control problem behind the code
Quick Checks Before You Call
A few things are safe to check yourself before you call:
- Make sure the washer is plugged in and the breaker hasn’t tripped.
- Check that both water supply valves behind the washer are fully open.
- Look for kinks in the fill hoses and the drain hose.
- Make sure the door or lid closes and latches firmly.
- Redistribute a heavy or lopsided load and try a drain and spin cycle.
Still not working? Call or text (703) 495-3095 or request service online.
Protect Your Home From Washer Leaks
- Inspect the fill hoses for bulges, cracks or rust at the fittings a few times a year.
- Washer makers such as Whirlpool recommend replacing inlet hoses about every 5 years.
- Know where your washer’s water shut-off valves are, and turn them off if you’ll be away for an extended time.
- Leave a front-load washer’s door open after use so the seal can dry.
Is It Worth Repairing Your Washer?
Many washer problems come down to parts like drain pumps, door locks, lid switches, belts, water valves and door seals. These repairs are often worth doing on a washer that’s otherwise in good condition.
Bigger repairs, such as drum bearings, a transmission or a main control board, cost more. On an older washer, replacement may make more sense. A common rule of thumb: consider replacing when the washer is near the end of its expected life and the repair would cost more than half the price of a comparable new one.
Our technician diagnoses the problem first and explains your options, so the decision is yours.
Washer Brands We Repair
- GE
- Whirlpool
- Samsung
- LG
- Frigidaire
- Maytag
- KitchenAid
- Bosch
- Electrolux
- JennAir
- Amana
- Café
Don’t see your brand? Call or text (703) 495-3095 with the brand and model number.
Washer Repair FAQs
Have another question? We’re open Monday – Saturday, 7 AM – 10 PM.
Call or text (703) 495-3095
© 2026 Beltway Appliance Repair. All Rights Reserved.
