Heating Repair

In-home heating repair for furnaces, boilers and heat pumps when your home isn’t warm enough. All major brands. Same-day appointments are often available, depending on our schedule.

Heating Repair at Your Home

Beltway Appliance Repair provides heating repair across Northern Virginia, Washington, DC and Maryland for gas, oil and electric furnaces, boilers, heat pumps and ductless mini-splits. Our factory certified technicians find out why your home isn’t heating properly and explain your repair options clearly so you can make an informed decision. Every repair is backed by our 90-day repair warranty.

For system-specific details, see furnace repair and heat pump repair.

Heating Systems We Repair

  • Gas furnaces
  • Oil furnaces
  • Electric furnaces
  • Boilers
  • Heat pumps
  • Ductless mini-splits
Heating repair: technician checking a wall thermostat while troubleshooting a home heating system

Common Heating Problems

What these symptoms usually point to. Our technician confirms the actual cause at your home before recommending a repair.

No Heat at All

The system won’t start, or nothing warm comes out.

Common causes:

  • Thermostat setting or power problem
  • Tripped breaker or service switch turned off
  • Ignition or control failure

Not Enough Heat

The system runs, but the house stays cold.

Common causes:

  • Dirty filter restricting airflow
  • Failing burner, element or heat pump part
  • Closed vents or leaking ducts

Uneven Temperatures

Some rooms are warm and others stay cold.

Common causes:

  • Blocked or closed registers
  • Duct problems
  • Air trapped in boiler radiators or baseboards

Boiler Problems

Cold radiators or baseboards, low pressure or a leaking boiler.

Common causes:

  • Air trapped in the system
  • Failed circulator pump
  • Pressure, expansion tank or valve problem

Heat Keeps Cycling

The heat turns on and off every few minutes.

Common causes:

  • Overheating from restricted airflow
  • Dirty flame sensor
  • Thermostat location or wiring

Strange Noises or Smells

Banging, squealing or a burning smell.

Common causes:

  • Dust burning off at the first start of the season (normal for a short time)
  • Worn blower motor or bearings
  • Delayed ignition, which should be checked promptly

Quick Checks Before You Call

A few things are safe to check yourself before you call:

  • Make sure the thermostat is set to Heat, above the room temperature, and has working batteries.
  • Check the breaker and the service switch near your furnace or boiler, which often looks like a light switch.
  • Replace a dirty air filter on a forced-air system.
  • Open and clear vents, registers and radiators.
  • On a heat pump, make sure the outdoor unit isn’t buried in snow or ice.

Still no heat? Call or text (703) 495-3095 or request service online.

Carbon Monoxide Safety

Fuel-burning heating equipment can produce carbon monoxide if it malfunctions. The U.S. Consumer Product Safety Commission recommends:

  • CO alarms on every level of your home and outside sleeping areas.
  • A professional inspection of furnaces, boilers and other fuel-burning equipment every year.
  • If a CO alarm sounds, get everyone outside to fresh air and call 911.
  • If you smell gas, leave right away and call 911 and your gas company from outside.

Source: U.S. Consumer Product Safety Commission

Should You Repair or Replace Your Heating System?

Most heating repairs involve parts like igniters, flame sensors, thermostats, blower motors, circulator pumps and controls. These are usually affordable and worth doing.

A cracked furnace heat exchanger, a leaking boiler or a failed heat pump compressor on an older system is when replacement often makes more sense. A common rule of thumb: consider replacing when the system is near the end of its expected life and the repair would cost more than half the price of comparable new equipment.

Our technician diagnoses the problem first and explains your options, so the decision is yours.

Heating Brands We Repair

  • Carrier
  • Trane
  • Lennox
  • Goodman
  • Rheem
  • Ruud
  • Bryant
  • American Standard
  • York
  • Amana
  • Daikin

Don’t see your brand? Call or text (703) 495-3095 with the brand and model number.

See all brands we service →

Heating Repair FAQs

Have another question? We’re open Monday – Saturday, 7 AM – 10 PM.

Call or text (703) 495-3095

Common causes include a dirty air filter, closed or blocked vents, a thermostat problem, a failing igniter or flame sensor on a furnace, or a heat pump that needs service. If the system runs but the house stays cold, it should be checked.

On a furnace, the burners may not be lighting or may be shutting off early, or the thermostat fan may be set to On instead of Auto. On a heat pump, cool air can mean a reversing valve, refrigerant or outdoor unit problem.

Yes. We repair boilers, including problems with cold radiators or baseboards, low pressure, circulator pumps and leaks.

Yes. We repair gas, oil and electric furnaces from all major brands.

Get everyone outside to fresh air right away and call 911. Don’t go back inside until emergency responders say it’s safe. Then have your heating equipment inspected before using it again.

Often, yes, for parts like igniters, sensors, motors and pumps. A cracked heat exchanger, a leaking boiler or repeated breakdowns on an older system may make replacement the better choice. Our technician explains your options after diagnosing the problem.

Same-day appointments are often available, depending on our schedule. We’re open Monday through Saturday from 7 AM to 10 PM across Northern Virginia, Washington, DC and Maryland. Call or text (703) 495-3095 to check availability.