Furnace Repair
In-home repair for gas, oil and electric furnaces that won’t ignite, blow cold air or keep shutting off. All major brands. Same-day appointments are often available, depending on our schedule.
Furnace Repair at Your Home
Beltway Appliance Repair provides furnace repair for gas, oil and electric furnaces at homes across Northern Virginia, Washington, DC and Maryland. Our factory certified technicians diagnose ignition, burner, airflow and control problems and explain your repair options clearly so you can make an informed decision. Every repair is backed by our 90-day repair warranty.
Not sure what kind of heating system you have? See heating repair for boilers, heat pumps and other systems.
Furnaces We Repair
- Gas furnaces
- Oil furnaces
- Electric furnaces

Common Furnace Problems
What these symptoms usually point to. Our technician confirms the actual cause at your home before recommending a repair.
Furnace Won’t Ignite
The inducer fan starts but the burners don’t light, or they light and go out.
Common causes:
- Failed hot surface igniter
- Dirty flame sensor
- Gas valve or pressure switch problem
Blowing Cold Air
The blower runs, but the air isn’t warm.
Common causes:
- Burners not lighting or shutting off early
- Thermostat fan set to On instead of Auto
- Overheating that trips the limit switch
Keeps Shutting Off
Short cycles, or locks out after a few tries.
Common causes:
- Dirty flame sensor
- Clogged filter causing overheating
- Blocked vent or pressure switch fault
Oil Furnace Problems
Won’t fire, smokes or leaves soot.
Common causes:
- Clogged oil nozzle or filter
- Burner motor or ignition problem
- Empty tank or blocked oil line
Electric Furnace Problems
Runs, but heat is weak or uneven.
Common causes:
- Failed heating element or sequencer
- Tripped breaker for an element
- Blower motor problem
Loud Noises
A bang at startup, squealing or rumbling.
Common causes:
- Delayed ignition
- Worn blower motor or bearings
- Loose panels or ductwork
Quick Checks Before You Call
A few things are safe to check yourself before you call:
- Set the thermostat to Heat, above room temperature, with the fan on Auto.
- Check the breaker and the furnace service switch, which often looks like a light switch near the furnace.
- Make sure the furnace’s front panel is fully closed. Most furnaces won’t run with the door switch open.
- Replace a dirty air filter.
- For an oil furnace, check the tank gauge. For a gas furnace, make sure the gas valve to the furnace is open.
Still no heat? Call or text (703) 495-3095 or request service online.
Carbon Monoxide Safety
Fuel-burning heating equipment can produce carbon monoxide if it malfunctions. The U.S. Consumer Product Safety Commission recommends:
- CO alarms on every level of your home and outside sleeping areas.
- A professional inspection of furnaces, boilers and other fuel-burning equipment every year.
- If a CO alarm sounds, get everyone outside to fresh air and call 911.
- If you smell gas, leave right away and call 911 and your gas company from outside.
Is It Worth Repairing Your Furnace?
Most furnace repairs involve parts like igniters, flame sensors, pressure switches, inducer and blower motors, limit switches and control boards. These are usually worth fixing on a furnace that’s otherwise in good shape.
A cracked heat exchanger is a different story. It can let carbon monoxide into your home and usually means the furnace should be replaced, especially if it’s older. A common rule of thumb: consider replacing when the furnace is near the end of its expected life and the repair would cost more than half the price of a comparable new one.
Our technician diagnoses the problem first and explains your options, so the decision is yours.
Furnace Brands We Repair
Don’t see your brand? Call or text (703) 495-3095 with the brand and model number.
Furnace Repair FAQs
Have another question? We’re open Monday – Saturday, 7 AM – 10 PM.
Call or text (703) 495-3095
© 2026 Beltway Appliance Repair. All Rights Reserved.
