Range & Cooktop Repair

In-home repair for gas and electric ranges, stoves and cooktops with burner, ignition and oven temperature problems. All major brands. Same-day appointments are often available, depending on our schedule.

Stove and Range Repair at Your Home

Beltway Appliance Repair provides in-home stove repair for gas and electric ranges and cooktops across Northern Virginia, Washington, DC and Maryland. Our factory certified technicians diagnose burner, igniter, element and oven temperature problems and explain your repair options clearly so you can make an informed decision. Every repair is backed by our 90-day repair warranty.

We repair freestanding and slide-in ranges and built-in cooktops from all major brands. For built-in ovens, see our wall oven repair page.

Ranges and Cooktops We Repair

  • Gas ranges
  • Electric ranges
  • Gas cooktops
  • Electric cooktops
  • Freestanding ranges
  • Slide-in ranges
Range repair: technician servicing a stainless range in a home kitchen

Common Range and Cooktop Problems

What these symptoms usually point to. Our technician confirms the actual cause at your home before recommending a repair.

Gas Burner Won’t Light

You hear clicking but no flame, or no click at all.

Common causes:

  • Clogged or wet burner ports
  • Worn igniter or spark electrode
  • Faulty spark module or switch

Burner Keeps Clicking

The igniter keeps sparking after the burner is lit or the knob is off.

Common causes:

  • Moisture from a spill
  • Faulty spark switch
  • Misaligned burner cap

Electric Element Not Heating

A coil or smooth-top element stays cold or only gets warm.

Common causes:

  • Burned-out element
  • Faulty infinite switch
  • Loose or burned terminal or receptacle

Oven Not Heating

The oven won’t heat or takes far too long to preheat.

Common causes:

  • Bake or broil element failure (electric)
  • Weak oven igniter (gas)
  • Temperature sensor or control problem

Oven Temperature Off

Food burns or undercooks at the set temperature.

Common causes:

  • Temperature sensor out of range
  • Control board calibration issue
  • Worn door gasket letting heat escape

Control or Display Problems

Error codes, unresponsive touchpads or a blank display.

Common causes:

  • Failed touchpad or control board
  • Power or wiring issue
  • Stuck relay on the control

Quick Checks Before You Call

A few things are safe to check yourself before you call:

  • For a gas burner, make sure the burner cap is seated flat and the ports are dry and clear.
  • Check the circuit breaker for an electric range.
  • Make sure the oven isn’t set to a delay or timed cook mode, or locked.
  • On an electric coil top, make sure the element is plugged fully into its receptacle.
  • Wipe up spills around igniters and let them dry before trying again.

Still not working? Call or text (703) 495-3095 or request service online.

If You Smell Gas

Washington Gas, the main gas utility across Northern Virginia, DC and nearby Maryland, advises:

  • Leave the building right away. Don’t try to find the source of the smell.
  • Don’t turn lights, appliances or switches on or off, and don’t light anything.
  • Once you’re safely outside, call 911, then the Washington Gas emergency line at 844-927-4427 (option 1).
  • Call us for repair only after the gas company says it’s safe.

Source: Washington Gas

Is It Worth Repairing Your Range?

Most range and cooktop repairs involve parts like igniters, spark switches, elements, infinite switches, bake elements and temperature sensors. These are usually affordable and worth doing.

A control board on an older, basic range can cost enough that replacement makes more sense. A common rule of thumb: consider replacing when the range is near the end of its expected life and the repair would cost more than half the price of a comparable new one. Pro-style and high-end ranges are often worth repairing much longer.

Our technician diagnoses the problem first and explains your options, so the decision is yours.

Range and Cooktop Brands We Repair

  • GE
  • Whirlpool
  • Samsung
  • LG
  • Frigidaire
  • Maytag
  • KitchenAid
  • Bosch
  • Electrolux
  • JennAir
  • Amana
  • Café

Don’t see your brand? Call or text (703) 495-3095 with the brand and model number.

See all brands we service →

Range & Cooktop Repair FAQs

Have another question? We’re open Monday – Saturday, 7 AM – 10 PM.

Call or text (703) 495-3095

The most common causes are clogged or wet burner ports, a burner cap that isn’t seated correctly, a worn igniter, or a faulty spark module or switch. Letting a wet burner dry fully often fixes the problem after a spill.

Continuous clicking is usually caused by moisture around the igniter from a spill or cleaning, a misaligned burner cap, or a faulty spark switch. If drying the burner doesn’t stop it, the switch may need to be replaced.

A burner that won’t heat usually has a burned-out element, a faulty infinite switch that controls its heat, or a loose or burned terminal or receptacle.

In an electric oven, the bake or broil element has often failed. In a gas oven, a weak igniter is the most common cause. A faulty temperature sensor or control can also stop the oven from heating.

Yes. We repair gas and electric ranges, stoves and cooktops from all major brands.

Leave the building right away, don’t operate switches or appliances, and once you’re outside call 911 and then Washington Gas at 844-927-4427 (option 1). Call us for the repair once the gas company says it’s safe.

Same-day appointments are often available, depending on our schedule. We’re open Monday through Saturday from 7 AM to 10 PM across Northern Virginia, Washington, DC and Maryland. Call or text (703) 495-3095 to check availability.