Garbage Disposal Repair

In-home repair for garbage disposals that are jammed, humming, leaking or won’t turn on. Same-day appointments are often available, depending on our schedule.

Garbage Disposal Repair at Your Home

Beltway Appliance Repair fixes garbage disposals at your home across Northern Virginia, Washington, DC and Maryland. Our factory certified technicians diagnose jams, leaks, electrical problems and worn parts and explain your repair options clearly so you can make an informed decision. Every repair is backed by our 90-day repair warranty.

A disposal problem can also back up your dishwasher, since many dishwashers drain through the disposal. See dishwasher repair if both are acting up.

Disposal Problems We Fix

  • Jammed
  • Humming
  • Leaking
  • Won’t turn on
  • Slow draining
  • Loud grinding
Garbage disposal repair: technician working on a disposal under a kitchen sink

Common Garbage Disposal Problems

What these symptoms usually point to. Our technician confirms the actual cause at your home before recommending a repair.

Disposal Jammed or Humming

The motor hums but the plates don’t turn.

Common causes:

  • Food, bones or a utensil stuck in the grinding chamber
  • Seized flywheel
  • Worn motor bearings

Won’t Turn On

No sound at all when you flip the switch.

Common causes:

  • Tripped reset button on the unit
  • Tripped breaker or GFCI
  • Failed wall switch or wiring

Leaking From the Top

Water drips where the disposal meets the sink.

Common causes:

  • Loose mounting assembly
  • Worn sink flange seal
  • Loose mounting ring

Leaking From the Side or Bottom

Water drips from hose connections or the unit itself.

Common causes:

  • Loose dishwasher or drain connection
  • Worn connection gasket
  • Cracked housing (usually means replacement)

Slow Draining

Water sits in the sink after running the disposal.

Common causes:

  • Food buildup in the drain line
  • Clogged trap
  • Worn grinding components

Loud Grinding or Rattling

New metal-on-metal or rattling noises.

Common causes:

  • Hard object in the chamber
  • Loose mounting
  • Worn impellers or bearings

Quick Checks Before You Call

A few things are safe to check yourself. Always turn the disposal off first, and never put your hand inside.

  • Press the red reset button on the bottom of the unit.
  • Check the circuit breaker or GFCI outlet that powers the disposal.
  • If it hums, turn the power off and use the hex key socket on the bottom to free the flywheel.
  • Use tongs, never your hand, to remove objects you can see in the chamber.
  • Run cold water for a few seconds before and after using the disposal.

Still stuck or leaking? Call or text (703) 495-3095 or request service online.

Disposal Safety

  • Never put your hand in the disposal, even when it’s off. Use tongs to remove objects.
  • Turn the disposal off at the switch, and at the breaker if you’re working on it, before checking for a jam.
  • A cracked disposal housing usually can’t be repaired and the unit will need to be replaced.
  • If water is leaking near the electrical connection, turn the power off at the breaker and call for service.

Should You Repair or Replace Your Disposal?

Many disposal problems are fixable on the spot, including jams, tripped reset buttons, loose mounting and worn connection gaskets.

A disposal with a cracked housing, a burned-out motor or a leak from the unit itself usually needs to be replaced rather than repaired. Our technician checks the cause so you’re not paying to fix a unit that will fail again soon.

Our technician diagnoses the problem first and explains your options, so the decision is yours.

Disposal Do’s and Don’ts

  • Do run cold water before, during and after grinding.
  • Do cut large scraps into small pieces.
  • Don’t pour grease, oil or fat down the disposal.
  • Don’t grind fibrous peels, bones, coffee grounds or eggshells in large amounts.
  • Don’t use harsh drain chemicals, which can damage disposal parts.

Garbage Disposal Repair FAQs

Have another question? We’re open Monday – Saturday, 7 AM – 10 PM.

Call or text (703) 495-3095

A humming disposal usually has a jam, such as food, a bone or a utensil caught in the grinding chamber, or a seized flywheel. Turn the power off and use the hex key socket on the bottom to free it. If it still hums, the motor may be failing.

The most common causes are a tripped reset button on the bottom of the unit, a tripped breaker or GFCI outlet, or a failed wall switch. Pressing the reset button is the first thing to try.

A leak from the top usually means a loose mounting assembly or a worn sink flange seal. Leaks from the side often come from the dishwasher or drain connections. A leak from the bottom of the unit itself usually means the housing has cracked and the disposal needs to be replaced.

Jams, reset issues, loose mounts and worn gaskets can usually be repaired. A cracked housing or burned-out motor usually means replacement. Our technician explains your options after diagnosing the problem.

No. Never put your hand in a disposal, even when it’s off. Use tongs to remove objects, and turn the power off at the switch or breaker before checking for a jam.

Same-day appointments are often available, depending on our schedule. We’re open Monday through Saturday from 7 AM to 10 PM across Northern Virginia, Washington, DC and Maryland. Call or text (703) 495-3095 to check availability.